NSN 5305-01-061-0740
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30FB3-3 for national stock number 5305010610740.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-061-0740.
-
MPN or Model
BACB30FB3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-101-2349 MPN 27-10395-2Reactor
- 1560-00-115-9842 MPN 9-63895-4Aircraft Stiffener Rib
- 1560-00-320-4555 MPN 5-39886-56Main Cowling Handle
- 1560-00-328-1064 MPN 5-97094-3Valve Bracket Assembly
- 1680-00-347-3104 MPN 90-2276-4Aircraft Control Tube Assembly
- 1680-00-348-3605 MPN 9-39972Inb Bearing Housing
- 1560-00-436-2410 MPN 5-85689-5Aircraft Structural Component Support
- 1560-00-575-6024 MPN 60-3260Extension Hook Guide
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-061-0740 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30FB3-3 | The Boeing Company |