NSN 5305-01-063-1744
High Torque Screw
Between 0.527 inches and 0.574 inches fastener length, flat countersunk head style, between 0.442 inches and 0.507 inches head diameter, grip diameter: between 0.2083 inches and 0.2492 inches .
Manufacturer part number AIC82-4-4 for national stock number 5305010631744.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-063-1744.
-
MPN or Model
AIC82-4-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 0.527 inches and 0.574 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.442 inches and 0.507 inches -
Grip Diameter
Between 0.2083 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-236-1819 MPN 32-33027-133Shoulder Screw
- 5305-00-505-2825 MPN LS15267V3-25Machine Screw
- 5305-01-095-5709 MPN AIC870-06-6Socket Head Cap Screw
- 5305-01-266-7799 MPN AIC984BL4-12Close Tolerance Screw
- 5305-01-324-8861 MPN AIC1165-3-12PClose Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-512-8356 MPN TX1027C3-8AFClose Tolerance Screw
- 5305-01-525-3903 MPN TX1027C3-3AFClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-063-1744 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC82-4-4 | Sps Technologies, Llc |
SFT22-4A4 | Sps Technologies, Llc |
VS2545T4F4 | Alcoa Global Fasteners, Inc. |
C082-4-4 | Lockheed Martin Corporation |
SFT22-4A4 | Sps Technologies, Llc |