NSN 5305-01-063-2359
High Torque Screw
Between 0.700 inches and 0.730 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578C4T5 for national stock number 5305010632359.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-063-2359.
-
MPN or Model
NAS1578C4T5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.700 inches and 0.730 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 1680-00-500-6457 MPN NAS303-45-3626Control Cable Assembly
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 5305-00-005-0629 MPN NAS1190E04P6NSocket Head Cap Screw
- 5305-00-020-3240 MPN NAS1219-5C10Machine Screw
- 5305-00-027-5666 MPN NAS608-256-4Socket Head Cap Screw
- 5305-00-051-2329 MPN MS51958-98Machine Screw
- 5305-00-051-4497 MPN MS51973-19Setscrew
- 5305-00-059-4556 MPN NAS600-18PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-063-2359 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C4T5 | National Aerospace Standards |
Stock Check
- NS: 1704
- NE: 1809