NSN 5305-01-064-4061
High Torque Screw
Between 1.261 inches and 1.291 inches fastener length, flat countersunk head style, between 0.221 inches and 0.279 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number NAS1151-16 for national stock number 5305010644061.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-064-4061.
-
MPN or Model
NAS1151-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.261 inches and 1.291 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.221 inches and 0.279 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-038-8561 MPN NAS1189E08P14HSocket Head Cap Screw
- 5305-00-150-3411 MPN NAS1191-08P10WLKSocket Head Cap Screw
- 5306-00-808-9833 MPN LE20035-12Machine Bolt
- 5306-00-916-4716 MPN NAS1004-42AMachine Bolt
- 5305-00-518-5726 MPN NAS1131E102PClose Tolerance Screw
- 5305-00-948-4110 MPN NAS1102-06-20Machine Screw
- 5305-01-082-0143 MPN NAS1132E14Close Tolerance Screw
- 5305-01-136-3538 MPN NAS1191E06T8BSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-064-4061 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1151-16 | Huck International, Inc. |
NAS1151-16 | National Aerospace Standards |
NAS1151-16 | Sps Technologies, Llc |
NAS1151-16 | Alcoa Global Fasteners, Inc. |
NAS1151-16 | Nor-cal Supply Co.inc. |
NAS1151-16 | Apcom Inc |
NAS1151-16 | Fastener Innovation Technology, Inc. |
NAS1151-16 | King Bag And Manufacturing Company |
NAS1151-16 | Hi-shear Corporation |
NAS1151-16 | Lisi Aerospace Canada Corp |
NAS1151-16 | Sps Technologies, Llc |
NAS1151-16 | Lawrence Engineering And Supply Inc |
NAS1151-16 | Huck Intl Inc |
NAS1151-16 | F And C Sales Inc |
NAS1151-16 | Air Industries Co Inc |