NSN 5305-01-064-4692
High Torque Screw
Between 0.536 inches and 0.566 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number PBF1166-3-3 for national stock number 5305010644692.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-064-4692.
-
MPN or Model
PBF1166-3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.536 inches and 0.566 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-450-5954 MPN AIC1023V5-19Close Tolerance Screw
- 5305-00-501-9741 MPN LS15267V3-5Machine Screw
- 5305-00-916-6689 MPN 51B333-10Machine Screw
- 5305-01-054-6257 MPN AIC985-3-10PClose Tolerance Screw
- 5305-01-149-1940 MPN L-8052-6-5Shoulder Screw
- 5305-01-231-7418 MPN 3M925C5-13DClose Tolerance Screw
- 5305-01-284-2488 MPN BACB30MS8S12Close Tolerance Screw
- 5305-01-352-1211 MPN AIC4410-5-61Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-064-4692 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1166-3-3 | Sps Technologies, Llc |
121558-3-A3P | Sps Technologies, Llc |
VT1694F3-3 | Alcoa Global Fasteners, Inc. |
AIC985-3-3 | Sps Technologies, Llc |
C7985-3-3 | Arconic Global Fasteners & Rings, |
C7985-3-3 | Sps Technologies, Llc |
H185-3-3 | Huck International, Inc. |
C7985-3-3 | Lockheed Martin Corporation |
AIC985-3-3P | Sps Technologies, Llc |