NSN 5305-01-064-5474
Tap Bolt
Between 4.650 inches and 4.750 inches fastener length, hexagon head style, between 0.455 inches and 0.483 inches head height, width between flats: between 1.100 inches and 1.125 inches .
Manufacturer part number 87750-619 for national stock number 5305010645474.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-064-5474.
-
MPN or Model
87750-619
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.750 inches -
Fastener Length
Between 4.650 inches and 4.750 inches -
Head Style
Hexagon -
Head Height
Between 0.455 inches and 0.483 inches -
Width Between Flats
Between 1.100 inches and 1.125 inches -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
10 -
Min. Tensile Strength (psi)
75000 pounds per square inch -
Hardness Rating
80.0 rockwell b -
Minimum Yield Strength
55000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc or chromate -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-403-1423 MPN 418420-3Check Valve
- 4820-00-842-5111 MPN A318469-1Check Valve
- 5935-01-334-8587 MPN 521685-2Electrical Receptacle Connector
- 5935-01-349-8057 MPN 6532B508-1Electrical Connector Cable Clamp
- 4920-01-644-5037 MPN 2000AS975-1Hf Ra Accessory Set
- 5925-01-350-3167 MPN 5SE01329-12Circuit Breaker
- 5306-00-579-0215 MPN A88414-6U Bolt
- 5306-01-323-7066 MPN 624254-1032DN3Machine Bolt
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-064-5474 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
87750-619 | Naval Air Warfare Center Aircraft |
MS35307-498 | Military Standards |