NSN 5305-01-065-6290
High Torque Screw
Between 0.635 inches and 0.682 inches fastener length, flat countersunk head style, between 0.280 inches and 0.304 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT239PB-3-6D for national stock number 5305010656290.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-065-6290.
-
MPN or Model
HT239PB-3-6D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.260 inches and 0.307 inches -
Fastener Length
Between 0.635 inches and 0.682 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.304 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.524 inches first hole and 0.544 inches first hole -
Material
Steel comp 4130 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-811-7282 MPN 51B333-56HMachine Screw
- 5305-01-062-3347 MPN BACB30RF6P14Close Tolerance Screw
- 5305-01-126-5264 MPN HT4049-6D14Close Tolerance Screw
- 5305-01-141-7904 MPN HT4020-3-4YShoulder Screw
- 5305-01-220-8670 MPN SC1785R-06-2104Machine Screw
- 5305-01-240-2658 MPN HT4009-6-8Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-065-6290 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239PB-3-6D | Hi-shear Corporation |
HT8043-3-6T | Alcoa Global Fasteners, Inc. |
HT8043-3-6T | Arconic Global Fasteners & Rings, |
Stock Check
![](/public/images/partscage_shelf3.png)