NSN 5305-01-065-7118
Panel Screw
1.160 inches fastener length, hexagon head style, 0.160 inches head height, width between flats: 0.375 inches .
Manufacturer part number SM-C-775486-5 for national stock number 5305010657118.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-065-7118.
-
MPN or Model
SM-C-775486-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.380 inches -
Fastener Length
1.160 inches -
Head Style
Hexagon -
Head Height
0.160 inches -
Width Between Flats
0.375 inches -
First Diameter From Head
0.140 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.740 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 630 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-648-6289 MPN 743333-1Power Autotransformer Transformer
- 5950-00-933-6673 MPN 8504188-1Radio Frequency Coil
- 5905-01-151-9986 MPN 904012-2Variable Resistor
- 5950-01-155-5563 MPN 8558734-5Reactor
- 5905-01-446-8396 MPN 1007921-3Nonprecision Wire Wound Variable Resistor
- 5905-00-051-5557 MPN RW59VR50Inductive Wire Wound Fixed Resistor
- 5930-00-064-5345 MPN 8534386-35Push Switch
- 5905-00-165-2491 MPN 2134594-501Inductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
![Mechanic Bill explains Panel Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-065-7118 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SM-C-775486-5 | Us Army Communications & |
SM-C-775486-5 | L-3 Communications Corporation |
SM-C-775486-5 | Lockheed Martin Corp |
Stock Check
![](/public/images/partscage_shelf3.png)