NSN 5305-01-066-5308
High Torque Screw
0.831 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.2016 inches and 0.2026 inches .
Manufacturer part number 66908H3-8 for national stock number 5305010665308.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-066-5308.
-
MPN or Model
66908H3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.331 inches -
Fastener Length
0.831 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.2016 inches and 0.2026 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps-13145 fscm 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-159-5554 MPN NAS1101E08-8Machine Screw
- 5305-00-595-5986 MPN GB510DC4C5DClose Tolerance Screw
- 5305-01-054-6250 MPN 121754-7-35Close Tolerance Screw
- 5305-01-056-1511 MPN BACB30LU4-22Close Tolerance Screw
- 5305-01-069-4918 MPN NAS1190-08T44KSocket Head Cap Screw
- 5305-01-071-8131 MPN NAS1189-3P7NHSocket Head Cap Screw
- 5305-01-082-5315 MPN 106363-3-1Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-066-5308 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66908H3-8 | Sps Technologies, Llc |