NSN 5305-01-066-5312
High Torque Screw
1.147 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2641 inches and 0.2651 inches .
Manufacturer part number 66908H4-12 for national stock number 5305010665312.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-066-5312.
-
MPN or Model
66908H4-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
1.147 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2641 inches and 0.2651 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps-13145 fscm 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-541-9194 MPN 106706H7-13Close Tolerance Screw
- 5305-00-541-9288 MPN 106706H8A15Close Tolerance Screw
- 5305-00-847-2581 MPN NAS1102-06-16Machine Screw
- 5305-01-032-3467 MPN NAS1221-04-7PMachine Screw
- 5305-01-123-6349 MPN NAS1101C04H7Machine Screw
- 5305-01-143-0607 MPN HT4009-5-14Shoulder Screw
- 5305-01-158-6248 MPN HT4024L9D45Close Tolerance Screw
- 5305-01-189-3756 MPN 122967V-6-2LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-066-5312 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66908H4-12 | Sps Technologies, Llc |