NSN 5305-01-066-9358
High Torque Screw
Between 1.822 inches and 1.869 inches fastener length, flat countersunk head style, between 0.329 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 51B333-25H for national stock number 5305010669358.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-066-9358.
-
MPN or Model
51B333-25H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 1.822 inches and 1.869 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.329 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.060 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.695 inches first hole and 1.762 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-146-7177 MPN AIC1023V6-23Close Tolerance Screw
- 5305-00-364-7306 MPN LS15267V3-14Machine Screw
- 5305-01-121-3994 MPN AIC202-3E207Screw
- 5305-01-144-0437 MPN NAS1101-02-8Machine Screw
- 5305-01-167-1089 MPN BACB30LR4-8Close Tolerance Screw
- 5305-01-303-6352 MPN AIC939-3-6PClose Tolerance Screw
- 5305-01-303-6353 MPN AIC939-3-8Close Tolerance Screw
- 5305-01-328-9227 MPN AIC1700-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-066-9358 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B333-25H | Northrop Grumman Technical Services, |
51B333-25H | Northrop Grumman Systems Corporation |
51B333-25H | Arconic Global Fasteners & Rings, |
51B333-25H | Sps Technologies, Llc |
51B333-25H | Huck International, Inc. |
51B333-25H | Hi-shear Corporation |
51B333-25H | Sps Technologies, Llc |
51B333-25H | Alcoa Global Fasteners, Inc. |
51B333-25H | Lisi Aerospace Canada Corp |
51B333-25H | Sps Technologies Inc |
51B333-25H | Huck Intl Inc |
51B333-25H | Northrop Grumman Systems Corporation |