NSN 5305-01-066-9359
High Torque Screw
6.031 inches fastener length, flat countersunk head style, 0.630 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number NAS335CP57-5 for national stock number 5305010669359.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-066-9359.
-
MPN or Model
NAS335CP57-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
6.031 inches -
Head Style
Flat countersunk -
Head Diameter
0.630 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.047 inches first hole -
Single Shear Strength
7300 pounds per square inch -
Thread Diameter
0.312 inches -
Grip Length
5.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.859 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-804Terminal Board Marker Strip
- 5940-01-425-7415 MPN NAS1063A14-423Terminal Board Marker Strip
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-051-2330 MPN MS51958-99Machine Screw
- 5305-00-052-4031 MPN NAS1352-04LE8PSocket Head Cap Screw
- 5305-00-053-1107 MPN MS35199-113Machine Screw
- 5305-00-059-3670 MPN MS51958-74Machine Screw
- 5305-00-106-4044 MPN NAS1100C5-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-066-9359 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335CP57-5 | National Aerospace Standards |