NSN 5305-01-067-5197
High Torque Screw
Between 20.098 inches and 20.128 inches fastener length, flat chamfer head style, between 0.367 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number AIC1184C315 for national stock number 5305010675197.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-067-5197.
-
MPN or Model
AIC1184C315
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 20.098 inches and 20.128 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.367 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 19.678 inches and 19.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-621-9122 MPN BACS12GR3L15Screw C778 Nrp
- 5305-00-205-5606 MPN A1C617-12Externally Relieved Body Screw
- 5305-00-514-8251 MPN LS15267V3-22Machine Screw
- 5305-00-660-3028 MPN TS702-06-6CRMachine Screw
- 5305-01-054-6238 MPN C9535-6-23Close Tolerance Screw
- 5305-01-059-7419 MPN NAS1101-08-6BMachine Screw
- 5305-01-130-4242 MPN AIC812-3-23Machine Screw
- 5305-01-276-1610 MPN 965812-421CMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-067-5197 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1184C315 | Sps Technologies, Llc |
CA1184C315 | Textron Fastening Systems |
903206-315 | Raytheon Company |
AIC1184C315 | Sps Technologies, Llc |
CA1184C315 | Textron Fastening Systems |
903206-315 | Raytheon Company |