NSN 5305-01-067-5838
High Torque Screw
Between 1.370 inches and 1.400 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC984-3-17 for national stock number 5305010675838.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-067-5838.
-
MPN or Model
AIC984-3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 1.370 inches and 1.400 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams-6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5881 MPN NAS1101E003Machine Screw
- 5305-01-047-7847 MPN 53B334-8Close Tolerance Screw
- 5305-01-144-4757 MPN NAS1101-4-10Machine Screw
- 5305-01-187-5957 MPN BACB30LH4-5Close Tolerance Screw
- 5305-01-261-1899 MPN 51B334-12XClose Tolerance Screw
- 5305-01-272-4803 MPN LE111-0033-2307Machine Screw
- 5305-01-435-3159 MPN BACB30LU6-25Close Tolerance Screw
- 5305-01-512-8373 MPN 3M1170C5-16AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-067-5838 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984-3-17 | Sps Technologies, Llc |
PBF1165-3-17 | Sps Technologies, Llc |
VT1693F3-17 | Alcoa Global Fasteners, Inc. |
121557-3-A17P | Sps Technologies, Llc |
C7984-3-17 | Sps Technologies, Llc |
C7984-3-17 | Arconic Global Fasteners & Rings, |
C7984-3-17 | Huck International, Inc. |
C7984-3-17 | Sps Technologies, Llc |
C7984-3-17 | Sps Technologies, Llc |
C7984-3-17 | Sps Technologies, Llc |
C7984-3-17 | Alcoa Global Fasteners, Inc. |
C7984-3-17 | Lockheed Martin Corporation |
AIC984-3-17P | Sps Technologies, Llc |