NSN 5305-01-072-4706
High Torque Screw
Between 1.043 inches and 1.063 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ring grip.
Manufacturer part number 121672-4-10 for national stock number 5305010724706.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-072-4706.
-
MPN or Model
121672-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 1.043 inches and 1.063 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ring grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.625 inches and 0.641 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.943 inches first hole and 0.973 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-017-0673 MPN 32-32467-66Aircraft Former
- 1560-00-079-1001 MPN 32G55374-3Wing Fitting
- 1560-00-138-7887 MPN 53-50046-17Hose Support Bracket
- 1560-00-140-6596 MPN 32-32364-22Aircraft Tee Clip
- 1680-00-159-8730 MPN 53-65050-15Aircraft Gearbox Assembly
- 1560-00-231-9168 MPN 53-42001-29Door Strut Rib
- 1560-00-261-6086 MPN 68A731063-2001Jettison Pivot Socket
- 4820-00-294-1565 MPN 7M848-2Restrictor Check Valve
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-072-4706 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121672-4-10 | Sps Technologies, Llc |
ST3M736-4-10 | Boeing Company, The |