NSN 5305-01-075-7089
High Torque Screw
Between 0.627 inches and 0.657 inches fastener length, flat countersunk head style, 0.698 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC984-6D33 for national stock number 5305010757089.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-075-7089.
-
MPN or Model
AIC984-6D33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 0.627 inches and 0.657 inches -
Head Style
Flat countersunk -
Head Diameter
0.698 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.111 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.415 inches first hole and 0.445 inches first hole -
Material
Steel -
Material Specification
Ams-6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-922-9030 MPN 504465Externally Relieved Body Screw
- 5305-01-035-8062 MPN 51B334-15Close Tolerance Screw
- 5305-01-098-7214 MPN AIC811-6-10Socket Head Cap Screw
- 5305-01-284-8378 MPN AIC985-5-28Close Tolerance Screw
- 5305-01-417-2492 MPN TX1027V-3-6Close Tolerance Screw
- 5305-01-435-3850 MPN BACB30LU7-35Close Tolerance Screw
- 5305-01-435-5864 MPN BACB30LU8-64Close Tolerance Screw
- 5305-01-435-7885 MPN BACB30LU9-29Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-075-7089 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984-6D33 | Sps Technologies, Llc |
PBF1165-6-33 | Sps Technologies, Llc |
VT1693F6D33 | Alcoa Global Fasteners, Inc. |
C7984-6D33 | Arconic Global Fasteners & Rings, |
C7984-6D33 | Sps Technologies, Llc |
C7984-6D33 | Lockheed Martin Corporation |
C7984-6D33 | Tri-metal Ladder Co |
AIC984-6D33P | Sps Technologies, Llc |