NSN 5305-01-076-4938
High Torque Screw
Between 1.236 inches and 1.266 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1580A5T12 for national stock number 5305010764938.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-076-4938.
-
MPN or Model
NAS1580A5T12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.236 inches and 1.266 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 1680-00-939-9126 MPN 25-4LTrunnion Tank Strap
- 5940-01-425-6524 MPN NAS1063A14-402Terminal Board Marker Strip
- 5940-01-381-7134 MPN NAS1063B246-255Terminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-009-9207 MPN NAS1096-3-23Hexagon Head Cap Screw
- 5305-00-053-1086 MPN MS35199-58Machine Screw
- 5305-00-057-0493 MPN MS24694S9Machine Screw
- 5305-00-061-0224 MPN NAS608C4H9Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-076-4938 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
NAS1580A5T12 | National Aerospace Standards |
Stock Check
- NE: 1916
- NS: 339