NSN 5305-01-076-4941
High Torque Screw
Between 1.079 inches and 1.109 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1580A6T8 for national stock number 5305010764941.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-076-4941.
-
MPN or Model
NAS1580A6T8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.569 inches and 0.619 inches -
Fastener Length
Between 1.079 inches and 1.109 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5940-01-429-1231 MPN NAS1063B41-50Terminal Board Marker Strip
- 5305-00-032-3697 MPN NAS1352-08LL10PSocket Head Cap Screw
- 5305-00-050-7932 MPN MS24667-43Socket Head Cap Screw
- 5305-00-057-0482 MPN MS24694C96Machine Screw
- 5305-00-082-1656 MPN NAS1081C06A3Setscrew
- 5305-00-097-8959 MPN NAS1190-06P7BSocket Head Cap Screw
- 5305-00-121-2460 MPN NAS1404-2Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-076-4941 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |
NAS1580A6T8 | National Aerospace Standards |