NSN 5305-01-076-4945
High Torque Screw
Between 0.448 inches and 0.478 inches fastener length, flat countersunk head style, between 0.2702 inches and 0.3016 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number SC1810-3-3 for national stock number 5305010764945.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-076-4945.
-
MPN or Model
SC1810-3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.300 inches -
Fastener Length
Between 0.448 inches and 0.478 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2702 inches and 0.3016 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1 cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-460-4669 MPN VT1040-4-2Close Tolerance Screw
- 5305-00-574-0225 MPN SC2174-3-4Machine Screw
- 5305-00-627-4365 MPN HT8100-3-11Close Tolerance Screw
- 5305-00-799-2008 MPN HT1029A5-8Close Tolerance Screw
- 5305-01-045-9642 MPN HT4016-4-14YShoulder Screw
- 5305-01-133-1573 MPN HT4041-3-4-5Close Tolerance Screw
- 5305-01-157-1984 MPN 3M893-3-5Machine Screw
- 5305-01-209-9366 MPN HT4059V3-11ASShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-076-4945 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
SC1810-3-3 | Arconic Global Fasteners & Rings, |
Stock Check
- NS: 103
- NE: 88