NSN 5305-01-076-4946
High Torque Screw
Between 0.551 inches and 0.581 inches fastener length, flat countersunk head style, between 0.3634 inches and 0.3948 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number SC1810-4-4 for national stock number 5305010764946.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-076-4946.
-
MPN or Model
SC1810-4-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.551 inches and 0.581 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3634 inches and 0.3948 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1 cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-027-4659 MPN HT4020-4-6Close Tolerance Screw
- 5305-01-033-9057 MPN BACB30EF8-6Socket Head Cap Screw
- 5305-01-197-8274 MPN HT4053-4D4AClose Tolerance Screw
- 5305-01-250-9215 MPN HT4028L4-10MClose Tolerance Screw
- 5305-01-265-3353 MPN HT4011-7-11Shoulder Screw
- 5305-01-287-0373 MPN HT4057-5-3AClose Tolerance Screw
- 5305-01-303-5634 MPN HT4075D4-10-21Close Tolerance Screw
- 5305-01-303-6352 MPN SC1823-3-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-076-4946 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |
SC1810-4-4 | Arconic Global Fasteners & Rings, |