NSN 5305-01-076-8101
Bolt Stove
Two drilled holes in head 90.0 degrees apart,from bearing surface of head,one hole is located 0.125 in. To 0.145 in. The other 0.060 in. To 0.070 in..
Manufacturer part number 456306 for national stock number 5305010768101.
Datasheet
-
Product description
Machine Screw NSN 5305-01-076-8101.
-
MPN or Model
456306
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.432 inches and 0.442 inches -
Head Style
Flat extended washer -
Head Diameter
Between 0.215 inches and 0.221 inches -
Head Height
Between 0.271 inches and 0.281 inches -
Extended Washer Diameter
Between 0.245 inches and 0.255 inches -
Extended Washer Thickness
Between 0.025 inches and 0.030 inches -
Hole Diameter
Between 0.0525 inches and 0.0645 inches -
Internal Drive Style
Slot -
Thread Diameter
0.164 inches -
Hole Quantity
2 -
Thready Qty Per Inch (tpi)
32 -
Screw Material
Steel comp 1215 -
Screw Material Specification
Aisi assn standard single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Ams 2400 assn standard single treatment response -
Head Hole Configuration Style
Round -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-031-3475 MPN PWA51135Plasma Spray Mask
- 4920-00-232-9605 MPN PWA23953Aircraft Maintenance Fixture
- 4920-00-407-9091 MPN PWA15798Turbine Test Stand
- 4920-00-773-3739 MPN PWA16116Bearing Seal Clamp
- 4920-00-773-7461 MPN PWA16051Aircraft Engine Maintenance Fixture
- 4920-00-917-1064 MPN PWA17630Aircraft Engine Maintenance Fixture
- 4920-00-945-2735 MPN PWA21922Aircraft Maintenance Fixture
- 4920-00-953-8549 MPN PWA21875Pressure Regulator
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-076-8101 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
456306 | United Technologies Corporation |