NSN 5305-01-077-3100
High Torque Screw
Between 1.194 inches and 1.224 inches fastener length, fillister countersunk head style, between 0.390 inches and 0.395 inches head diameter, head height: 0.015 inches .
Manufacturer part number HT4016-4-13 for national stock number 5305010773100.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-077-3100.
-
MPN or Model
HT4016-4-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.326 inches and 0.397 inches -
Fastener Length
Between 1.194 inches and 1.224 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2490 inches and 0.2500 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-250-2144 MPN AIC551C3-647Shoulder Screw
- 5305-00-514-8251 MPN LS15267V3-22Machine Screw
- 5305-00-613-8274 MPN HT4028L4-24Close Tolerance Screw
- 5305-01-143-7446 MPN ST3M653C6-14AShoulder Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-435-5528 MPN BACB30LU8-23Close Tolerance Screw
- 5305-01-513-8717 MPN TX1026C6-20AClose Tolerance Screw
- 5306-00-053-8731 MPN 37C302277P103Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-077-3100 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4016-4-13 | Hi-shear Corporation |
HT4016-4-13 | Lisi Aerospace Canada Corp |
HT4016-4-13 | Sps Technologies, Llc |
HT4016-4-13 | Arconic Global Fasteners & Rings, |
HT4016-4-13 | Huck International, Inc. |
HT4016-4-13 | Sps Technologies, Llc |
HT4016-4-13 | Sps Technologies, Llc |
HT4016-4-13 | Sps Technologies, Llc |
HT4016-4-13 | Alcoa Global Fasteners, Inc. |
HT4016-4-13 | Sps Technologies Ltd Tj Brooks |
ST3M455 | Boeing Company, The |