NSN 5305-01-077-5798
Bolt Stove
Between 0.766 inches and 0.796 inches fastener length, flat countersunk head style, between 0.344 inches and 0.385 inches head diameter, internal drive style: high-torque.
Manufacturer part number 122219 for national stock number 5305010775798.
Datasheet
-
Product description
Machine Screw NSN 5305-01-077-5798.
-
MPN or Model
122219
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.766 inches and 0.796 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.344 inches and 0.385 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Iron alloy 660 -
Screw Material Specification
Ams5731, ams5735 or ams5737 assn standard single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-35 or qq-p-416, type 11, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-079-6398 MPN 1819929Safety Relief Valve
- 5905-00-121-9932 MPN 0683-3915Composition Fixed Resistor
- 4920-00-177-6393 MPN 247AS38-336-001Amplitude Detector
- 5930-00-655-1522 MPN 320AS116-12Toggle Switch
- 4920-00-757-8159 MPN 63A33F11Extender-adapter
- 5905-00-901-7981 MPN 64A6A12-4500R0A21Noninductive Wire Wound Fixed Resistor
- 4920-01-136-4338 MPN 1163AS178-1Rear Section Assembly
- 4920-01-196-9918 MPN 1314AS140-1Union Tee Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-077-5798 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
122219 | Sps Technologies, Llc |
642AS3716 | Naval Air Systems Command |
Stock Check
- NE: 1573
- NS: 67