NSN 5305-01-078-4463
High Torque Screw
Between 0.910 inches and 0.940 inches fastener length, pan no. 2 head style, between 0.795 inches and 0.813 inches head diameter, head height: between 0.230 inches and 0.245 inches .
Manufacturer part number NAS1578C7H4 for national stock number 5305010784463.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-078-4463.
-
MPN or Model
NAS1578C7H4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.650 inches and 0.700 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.795 inches and 0.813 inches -
Head Height
Between 0.230 inches and 0.245 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-051-8606 MPN MS16995-94Socket Head Cap Screw
- 5305-00-069-0301 MPN NAS1352C04-6Socket Head Cap Screw
- 5305-00-082-1760 MPN MS21287-02Machine Screw
- 5305-00-104-5078 MPN NAS1352-6LE64PSocket Head Cap Screw
- 5305-00-144-9753 MPN NAS1101E08-7Machine Screw
- 5305-00-149-9926 MPN NAS334A10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-078-4463 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C7H4 | National Aerospace Standards |