NSN 5305-01-078-8939
High Torque Screw
Between 0.386 inches and 0.416 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153E2 for national stock number 5305010788939.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-078-8939.
-
MPN or Model
NAS1153E2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.386 inches and 0.416 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1153 professional/industrial association standard
More from these suppliers
- 5940-01-451-2576 MPN NAS1063D1-1Terminal Board Marker Strip
- 5935-01-323-4640 MPN MS33687-24-10PElectrical Connector Insert
- 5305-00-097-4534 MPN NAS1221-3E14Machine Screw
- 5305-00-137-3071 MPN MS21262-60Socket Head Cap Screw
- 5305-00-139-3223 MPN NAS1402-9Machine Screw
- 5305-00-142-4676 MPN NAS1635-06-22Machine Screw
- 5305-00-145-0887 MPN MS51959-12BMachine Screw
- 5305-00-203-1253 MPN NAS1635-04-18Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-078-8939 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153E2 | National Aerospace Standards |