NSN 5305-01-079-1373
High Torque Screw
Between 0.797 inches and 0.827 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number 3M707-3-8-5 for national stock number 5305010791373.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-079-1373.
-
MPN or Model
3M707-3-8-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.797 inches and 0.827 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112, ty d, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-025-4068 MPN 51B600C3-12BMachine Screw
- 5305-00-181-0935 MPN 112-0910-001Machine Screw
- 5305-00-357-1866 MPN HT4028L4-14Close Tolerance Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-01-010-2364 MPN HT4016-4-7XShoulder Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-049-8193 MPN HT4028L7-9MClose Tolerance Screw
- 5305-01-141-7905 MPN HT4020-6-20AXShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-079-1373 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M707-3-8-5 | Boeing Company, The |
HT4041-3-8-5 | Huck International, Inc. |
HT4041-3-8-5 | Arconic Global Fasteners & Rings, |
HT4041-3-8-5 | Hi-shear Corporation |
3M707-3-8-5 | Sps Technologies, Llc |
HT4041-3-8-5 | Fastener Innovation Technology, Inc. |
11873-3-8-5 | Reid Products Inc. |
3M707-3-8-5 | Alcoa Global Fasteners, Inc. |
HT4041-3-8-5 | Lisi Aerospace Canada Corp |
HT4041-3-8-5 | Huck Intl Inc |
HT4041-3-8-5 | Sps Technologies, Llc |
HT4041-3-8-5 | Sps Technologies, Llc |
HT4041-3-8-5 | Alcoa Global Fasteners, Inc. |