NSN 5305-01-079-2466
High Torque Screw
Between 1.077 inches and 1.124 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number NAS334CP10-5 for national stock number 5305010792466.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-079-2466.
-
MPN or Model
NAS334CP10-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 1.077 inches and 1.124 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.066 inches first hole and 0.086 inches first hole -
Single Shear Strength
4650 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.614 inches and 0.634 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.926 inches first hole and 0.946 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas334 professional/industrial association standard
More from these suppliers
- 5940-00-056-8302 MPN NAS707T4Stud Terminal
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5935-00-528-8440 MPN NAS1641R16T24SNElectrical Receptacle Connector
- 1680-01-524-1349 MPN NAS520-12-9Aircr Air Duct Hose
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5930-00-964-4485 MPN NAS1072-2Switch Guard
- 5305-00-008-5845 MPN NAS1632C7Machine Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-079-2466 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334CP10-5 | National Aerospace Standards |