NSN 5305-01-081-3105
High Torque Screw
Between 6.370 inches and 6.417 inches fastener length, flat countersunk head style, between 0.950 inches and 1.017 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number H148-8-90 for national stock number 5305010813105.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-081-3105.
-
MPN or Model
H148-8-90
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.735 inches and 0.802 inches -
Fastener Length
Between 6.370 inches and 6.417 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.950 inches and 1.017 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 5.615 inches and 5.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5884 MPN NAS1101E08-9Machine Screw
- 5305-00-080-0152 MPN 3MA334CFA5Machine Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-01-047-0472 MPN HT4010-6-13Shoulder Screw
- 5305-01-096-7350 MPN HT4068-5-12AClose Tolerance Screw
- 5305-01-132-5286 MPN HT8137-5-13ASClose Tolerance Screw
- 5305-01-138-7235 MPN HT4025L7-25Close Tolerance Screw
- 5305-01-196-0448 MPN 3M1034V4-6-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-081-3105 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H148-8-90 | Huck International, Inc. |
106706H-8-A90 | Sps Technologies, Llc |
HT8171-8-90 | Alcoa Global Fasteners, Inc. |
HR204-8-90 | Hi-shear Corporation |
HR204-8-90 | Lisi Aerospace Canada Corp |
106706H-8-A90 | Sps Technologies, Llc |
GB510BC8-90 | Northrop Grumman Systems Corporation |
GB510CE8-90 | Sps Technologies, Llc |
SC1779-8-90 | Arconic Global Fasteners & Rings, |
PBF1202-8-90 | Sps Technologies, Llc |
106706T-8-90 | Sps Technologies, Llc |
GB510CE8-90 | Northrop Grumman Systems Corporation |
H148-8-90 | Huck Intl Inc |