NSN 5305-01-082-0148
High Torque Screw
Between 0.863 inches and 0.893 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1154E9 for national stock number 5305010820148.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-082-0148.
-
MPN or Model
NAS1154E9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.863 inches and 0.893 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1154 professional/industrial association standard
More from these suppliers
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-003-1691 MPN MS24693-50BMachine Screw
- 5305-00-056-7859 MPN NAS560HK4-7Machine Screw
- 5305-00-057-0539 MPN NASM51958Machine Screw
- 5305-00-058-9376 MPN MS51977-43Setscrew
- 5305-00-059-8256 MPN MS35214-31Machine Screw
- 5305-00-066-7336 MPN NAS1743C02R10USocket Head Cap Screw
- 5305-00-068-5393 MPN MS24667-4Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-082-0148 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154E9 | National Aerospace Standards |