NSN 5305-01-082-0151
High Torque Screw
Between 0.813 inches and 0.853 inches fastener length, flat chamfer head style, between 0.3737 inches and 0.3742 inches head diameter, head height: between 0.253 inches and 0.273 inches .
Manufacturer part number VS2796-4-6 for national stock number 5305010820151.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-082-0151.
-
MPN or Model
VS2796-4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.438 inches and 0.458 inches -
Fastener Length
Between 0.813 inches and 0.853 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3737 inches and 0.3742 inches -
Head Height
Between 0.253 inches and 0.273 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.375 inches and 0.395 inches -
Width Across Flats
Between 0.188 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
170000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.693 inches first hole and 0.753 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Fms-0131 fscm 81755 mfr ref single material response or ams-5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-116-1663 MPN NAS1101-6-16Machine Screw
- 5305-00-321-9139 MPN AIC822-06-5Socket Head Cap Screw
- 5305-00-450-5976 MPN AIC1023V4-10Close Tolerance Screw
- 5305-00-847-2581 MPN NAS1102-06-16Machine Screw
- 5305-01-050-9001 MPN AIC984-3-9Close Tolerance Screw
- 5305-01-051-0624 MPN BACS12CK3-10Machine Screw
- 5305-01-190-5778 MPN LD111-0044-2309Close Tolerance Screw
- 5305-01-261-1893 MPN 51B334-8XClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-082-0151 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2796-4-6 | Alcoa Global Fasteners, Inc. |
AIC1025-4-6 | Sps Technologies, Llc |
64494-4-6 | Sps Technologies, Llc |
C630-4-6 | Lockheed Martin Corporation |