NSN 5305-01-082-2033
Bolt Stove
Between 1.765 inches and 1.812 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, internal drive style: torque set.
Manufacturer part number 106363-3-23 for national stock number 5305010822033.
Datasheet
-
Product description
Machine Screw NSN 5305-01-082-2033.
-
MPN or Model
106363-3-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.317 inches and 0.384 inches -
Fastener Length
Between 1.765 inches and 1.812 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-7430 MPN SFH22-4A24Machine Screw
- 5305-00-824-8573 MPN NAS1204-12DClose Tolerance Screw
- 5305-01-025-6961 MPN HT4019-4D14Close Tolerance Screw
- 5305-01-027-2005 MPN HT4020-3-7AClose Tolerance Screw
- 5305-01-044-2219 MPN NAS1221-06-6TMachine Screw
- 5305-01-076-4881 MPN NAS1101-06-10Machine Screw
- 5305-01-103-8821 MPN HT4068-5-11AClose Tolerance Screw
- 5305-01-141-7193 MPN 3M902C6-10AShoulder Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-082-2033 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106363-3-23 | Sps Technologies, Llc |