NSN 5305-01-082-9291
High Torque Screw
Between 0.660 inches and 0.690 inches fastener length, flat chamfer head style, between 0.367 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number 106620-304 for national stock number 5305010829291.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-082-9291.
-
MPN or Model
106620-304
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.660 inches and 0.690 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.367 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Nas 498 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-5920 MPN AIC811-04-15Socket Head Cap Screw
- 5305-00-995-7078 MPN AIC811-6-12Socket Head Cap Screw
- 5305-01-014-8448 MPN NAS1101V3-8Machine Screw
- 5305-01-054-4637 MPN BACB30LK3-3Close Tolerance Screw
- 5305-01-054-6273 MPN C7985-5-15Close Tolerance Screw
- 5305-01-370-9398 MPN AIC1198-3-11Machine Screw
- 5305-01-512-8385 MPN TX1024V4-2-5AClose Tolerance Screw
- 5305-01-513-9648 MPN HT4027-5-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-082-9291 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106620-304 | Sps Technologies, Llc |
CA1184-304 | Textron Fastening Systems |
SC2219-4-304 | Arconic Global Fasteners & Rings, |
AIC1184-304 | Sps Technologies, Llc |
965809-304C | Raytheon Company |
965809-304C | Sps Technologies, Llc |