NSN 5305-01-083-2297
High Torque Screw
Between 0.652 inches and 0.699 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number HT326-4A6 for national stock number 5305010832297.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-083-2297.
-
MPN or Model
HT326-4A6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.267 inches and 0.334 inches -
Fastener Length
Between 0.652 inches and 0.699 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837, type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510n manufacturers standard
More from these suppliers
- 5305-00-310-6180 MPN 965812-108CMachine Screw
- 5305-00-397-4704 MPN EP7900-8B4Spec Captive Screw
- 5305-00-505-2512 MPN NAS1101E06-4Machine Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-915-2602 MPN NAS1122C1Close Tolerance Screw
- 5305-00-927-0021 MPN NAS1123-14Close Tolerance Screw
- 5305-01-046-3964 MPN HT4011-5-3Shoulder Screw
- 5305-01-046-3975 MPN HT4010-5-17Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-083-2297 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT326-4A6 | Hi-shear Corporation |
HT8181F4-6 | Alcoa Global Fasteners, Inc. |
BM19045-4A6 | Huck International, Inc. |
HT326-4A6 | Lisi Aerospace Canada Corp |
SFH22D4A6 | Sps Technologies, Llc |
SFH22D4A6 | Sps Technologies, Llc |
GB510N4A6 | Northrop Grumman Systems Corporation |
BM19045-4A6 | Huck Intl Inc |