NSN 5305-01-084-7058
High Torque Screw
Between 0.964 inches and 1.011 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number GB510N4A11 for national stock number 5305010847058.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-084-7058.
-
MPN or Model
GB510N4A11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.266 inches and 0.333 inches -
Fastener Length
Between 0.964 inches and 1.011 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837, type 2 cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510n manufacturers specification control
More from these suppliers
- 5305-00-356-1623 MPN LS15265V3-2Close Tolerance Screw
- 5305-00-889-2658 MPN NAS1190-08P10LSocket Head Cap Screw
- 5305-01-024-9881 MPN DMSPWW7500-8-A-4Panel Screw Assembly
- 5305-01-141-7198 MPN HT4020-5-16AYShoulder Screw
- 5305-01-165-2459 MPN HT4057-4D44Close Tolerance Screw
- 5305-01-188-7592 MPN E178-2408Close Tolerance Screw
- 5305-01-211-3109 MPN HT4060V3-12Shoulder Screw
- 5305-01-327-5180 MPN BACB30EL6-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-084-7058 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510N4A11 | Northrop Grumman Systems Corporation |
BM19045-4A11 | Huck International, Inc. |
SFH22D4A11 | Sps Technologies, Llc |
HT326-4A11 | Hi-shear Corporation |
HT8181F4-11 | Alcoa Global Fasteners, Inc. |
SFH22D4A11 | Sps Technologies, Llc |
HT326-4A11 | Lisi Aerospace Canada Corp |
BM19045-4A11 | Huck Intl Inc |