NSN 5305-01-089-3144
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number WC4049-3-6 for national stock number 5305010893144.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-089-3144.
-
MPN or Model
WC4049-3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23-112 type c, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-160-5696 MPN LD111-0044-0514Close Tolerance Screw
- 5305-01-339-5013 MPN BACB30NN4S13Close Tolerance Screw
- 5305-01-435-0166 MPN BACB30LU14-27XClose Tolerance Screw
- 5306-00-173-7502 MPN 3022T97P01Externally Relieved Body Bolt
- 5306-00-514-7741 MPN VEP220555-6-22Machine Bolt
- 5306-01-043-5711 MPN GB511B8D16Shear Bolt
- 5306-01-058-3897 MPN VFK101G6-023Shear Bolt
- 5306-01-123-9781 MPN VEP220221-8F15Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-089-3144 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
WC4049-3-6 | West Coast Aerospace Inc |
HT4049-3-6 | Sps Technologies, Llc |
HT4049-3-6 | Hi-shear Corporation |
HT4049-3-6 | Arconic Global Fasteners & Rings, |
HT4049-3-6 | Huck International, Inc. |
ST3M714-3-6 | Fastener Innovation Technology, Inc. |
HT4049-3-6 | Sps Technologies Ltd Tj Brooks |
HT4049-3-6 | Lisi Aerospace Canada Corp |
ST3M714-3-6 | Boeing Company, The |
HT4049-3-6 | Huck Intl Inc |
10115000 | Nimikkeistokeskus Ncb Finland |
HT4049-3-6 | Sps Technologies, Llc |
HT4049-3-6 | Alcoa Global Fasteners, Inc. |
ST3M714-3-6 | Valley-todeco, Inc. |
HT4049-3-6 | Sps Technologies, Llc |
ST3M714-3-6 | Heartland Precision Fasteners, Inc. |
ST3M714-3-6 | Houston Precision Fasteners I, Lp |
HT4049-3-6 | Sps Technologies, Llc |
11931-3-6 | Reid Products Inc. |