NSN 5305-01-090-6318
Bolt Stove
Between 0.089 inches and 0.094 inches fastener length, flat chamfer head style, between 0.104 inches and 0.118 inches head diameter, head height: between 0.041 inches and 0.046 inches .
Manufacturer part number C320009000 for national stock number 5305010906318.
Datasheet
-
Product description
Machine Screw NSN 5305-01-090-6318.
-
MPN or Model
C320009000
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.058 inches and 0.094 inches -
Fastener Length
Between 0.089 inches and 0.094 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.104 inches and 0.118 inches -
Head Height
Between 0.041 inches and 0.046 inches -
Internal Drive Style
Slot -
Thread Diameter
0.073 inches -
Thready Qty Per Inch (tpi)
64 -
Screw Material
Steel comp 305 or steel comp 303 or steel comp 303se -
Screw Material Specification
Qq-s-763 federal specification 1st material response or astm a582 assn standard 2nd material response or astm a582 assn standard 3rd material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
C190000120 fscm 88818 mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-231-9715 MPN G141-098-009Push Switch
- 5985-00-232-8103 MPN G128-310-001Waveguide Assembly
- 5905-00-233-3983 MPN B600001391Wire Wound Fixed Resistor
- 5930-00-238-7764 MPN ES12727Sensitive Switch
- 5930-00-407-2072 MPN B507700025Push Switch
- 5940-00-562-5650 MPN 226267Terminal Board
- 5985-00-721-4062 MPN G128-165-001Waveguide Assembly
- 5905-00-778-4999 MPN C600007416Noninductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-090-6318 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C320009000 | Kearfott Corporation |