NSN 5305-01-090-6335
High Torque Screw
Between 1.392 inches and 1.422 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LR3-17 for national stock number 5305010906335.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-090-6335.
-
MPN or Model
BACB30LR3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 1.392 inches and 1.422 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-538-7413 MPN BACB30LU6-21Close Tolerance Screw
- 5305-01-114-7964 MPN BACB30LU4-12Close Tolerance Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5306-00-156-0655 MPN 3024T68P01Machine Bolt
- 5306-01-025-6435 MPN VAL23029-4-13Close Tolerance Bolt
- 5306-01-044-2985 MPN VAL23607-4-32Shoulder Bolt
- 5306-01-054-4598 MPN BACB30NE3D5Shear Bolt
- 5306-01-130-9474 MPN ST3M747-7-18Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-090-6335 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LR3-17 | The Boeing Company |
BACB30LR3-17 | Sps Technologies, Llc |
BACB30LR3-17 | Valley-todeco, Inc. |
BACB30LR3-17 | Arconic Global Fasteners & Rings, |
BACB30LR3-17 | Federal Manufacturing Corporation |
BACB30LR3-17 | Huck International, Inc. |
BACB30LR3-17 | Sps Technologies, Llc |
BACB30LR3-17 | Sps Technologies, Llc |
BACB30LR3-17 | Alcoa Global Fasteners, Inc. |