NSN 5305-01-095-3295
High Torque Screw
Between 1.314 inches and 1.344 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4025L6-11 for national stock number 5305010953295.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-095-3295.
-
MPN or Model
HT4025L6-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.666 inches -
Fastener Length
Between 1.314 inches and 1.344 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-001-1802 MPN 173AS377-3Electrical-electronic Equipment Control Panel
- 5935-00-043-0844 MPN 642AS7971Electrical Receptacle Connector
- 5985-00-177-6387 MPN 247ASC0879-001Radio Frequency Reflection Isolator
- 5945-00-209-9330 MPN 328AS206-1Hybrid Relay
- 5930-00-411-4293 MPN 68A14F429-26Push Switch
- 4920-00-824-1411 MPN 63A106F251Drive Motor Assy
- 5935-00-882-9989 MPN 247ASC0521-005Electrical Receptacle Connector
- 5950-01-023-1492 MPN 917AS127-10Radio Frequency Coil
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-095-3295 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L6-11 | Sps Technologies, Llc |
642AS0730-2 | Naval Air Systems Command |