NSN 5305-01-095-3296
High Torque Screw
Between 2.001 inches and 2.031 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4025L6-22 for national stock number 5305010953296.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-095-3296.
-
MPN or Model
HT4025L6-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.666 inches -
Fastener Length
Between 2.001 inches and 2.031 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-132-2261 MPN 62A114C100Power Transformer
- 5905-00-197-3221 MPN 145AS518-2555Film Fixed Resistor
- 1680-00-319-3602 MPN 52A315C28Seat Bac Latch Assy
- 4920-00-560-7532 MPN 67A96C4-1Teste Cylinder Assy
- 5945-00-964-4268 MPN 1386AS275Electromagnetic Relay
- 5905-01-016-1070 MPN 247AS-C1889-001Film Fixed Resistor
- 5935-01-046-5426 MPN 383AS512Electrical Receptacle Connector
- 5930-01-060-4897 MPN 1154AS-1154-1Pressure Switch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-095-3296 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L6-22 | Hi-shear Corporation |
HT4025L6-22 | Lisi Aerospace Canada Corp |
HT4025L6-22 | Sps Technologies, Llc |
ST3M454-6L22 | Boeing Company, The |
ST3M454-6L22 | Fastener Innovation Technology, Inc. |
HT4025L6-22 | Alcoa Global Fasteners, Inc. |
HT4025L6-22 | Sps Technologies, Llc |
11905-6L22 | Reid Products Inc. |
642AS0730-3 | Naval Air Systems Command |
HT4025L6-22 | Huck Intl Inc |