NSN 5305-01-095-7929
High Torque Screw
Between 2.329 inches and 2.359 inches fastener length, flat countersunk head style, between 0.497 inches and 0.508 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4025L4D30 for national stock number 5305010957929.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-095-7929.
-
MPN or Model
HT4025L4D30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 2.329 inches and 2.359 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.508 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.208 inches first hole and 2.248 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-106-3860 MPN 3M926-5L10Close Tolerance Screw
- 5305-00-162-2975 MPN R1473P002Machine Screw
- 5305-00-925-0641 MPN VS2681-013Machine Screw
- 5305-01-004-9528 MPN HT4027-3-3Close Tolerance Screw
- 5305-01-082-2031 MPN SC1811C4-13Machine Screw
- 5305-01-138-7740 MPN HT4041-5-11-6Close Tolerance Screw
- 5305-01-143-1751 MPN HT4041-5-11M6YShoulder Screw
- 5305-01-164-9729 MPN SC1779-7-29DClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-095-7929 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L4D30 | Huck International, Inc. |
HT4025L4D30 | Arconic Global Fasteners & Rings, |
ST3M454-4DL30 | Boeing Company, The |
ST3M454-4DL30 | Huck International, Inc. |
11905-4DL30 | Reid Products Inc. |
ST3M454-4DL30 | Alcoa Global Fasteners, Inc. |
HT4025L4D30 | Sps Technologies, Llc |
HT4025L4D30 | Hi-shear Corporation |
HT4025L4D30 | Lisi Aerospace Canada Corp |
HT4025L4D30 | Huck Intl Inc |
HT4025L4D30 | Sps Technologies, Llc |
HT4025L4D30 | Alcoa Global Fasteners, Inc. |
ST3M454-4DL30 | Twist Tite Mfg, Inc |