NSN 5305-01-097-5842
High Torque Screw
Bearing surface of head grooved to 0.472 in. Min,0.474 in. Max dia. 0.115 in. Min,0.120 in. Max from top of head.
Manufacturer part number HR101H10-28 for national stock number 5305010975842.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-097-5842.
-
MPN or Model
HR101H10-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.843 inches and 0.893 inches -
Fastener Length
Between 2.603 inches and 2.633 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.645 inches and 0.672 inches -
Grip Diameter
Between 0.6235 inches and 0.6245 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.625 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 59.75 degrees and 60.25 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-014-8317 MPN NAS1101E3-6Machine Screw
- 5305-01-054-6281 MPN AIC984-3-8Close Tolerance Screw
- 5305-01-101-6028 MPN AIC811-04-49Socket Head Cap Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-217-4009 MPN AIC4040-3-09RClose Tolerance Screw
- 5305-01-243-9356 MPN SM-C-800983-12Socket Head Cap Screw
- 5305-01-268-5947 MPN AIC812-3-22Machine Screw
- 5305-01-417-2492 MPN TX1026V3-6AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-097-5842 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR101H10-28 | Hi-shear Corporation |
HR101H10-28 | Lisi Aerospace Canada Corp |
AIC10234H10-28 | Sps Technologies, Llc |
6404H10-28 | Sps Technologies, Llc |
VT1039H10-28 | Alcoa Global Fasteners, Inc. |
CS318642H10-28 | Textron Fastening Systems |
C387H10-28 | Lockheed Martin Corporation |