NSN 5305-01-097-6574
High Torque Screw
Between 2.422 inches and 2.454 inches fastener length, flat countersunk head style, between 0.451 inches and 0.511 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number BACB30AB-P4-33A for national stock number 5305010976574.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-097-6574.
-
MPN or Model
BACB30AB-P4-33A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.402 inches -
Fastener Length
Between 2.422 inches and 2.454 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.451 inches and 0.511 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 2.052 inches and 2.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4037 -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 1 class 3 federal specification 1st treatment response or qq-p-416 type 2 class 3 federal specification 2nd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-073-2517 MPN 107R3566-1Swashplate Drive Arm Link
- 1560-00-073-5591 MPN A02EK100-1Antenna Parts Kit
- 5940-00-113-8184 MPN BACT12AC50Lug Terminal
- 5935-00-117-8126 MPN 357-7396-030Connector Adapter
- 1560-00-210-9368 MPN 80292-15Reinforcement Plate
- 1560-00-326-2062 MPN 3-51508-1Actuator Keeper Ring
- 1680-00-343-4120 MPN 60-2706Boom Hoist Co Guide
- 4820-00-566-3114 MPN 65-5003-2Manifold Valve Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-097-6574 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30AB-P4-33A | The Boeing Company |