NSN 5305-01-097-7193
Panel Screw
0.310 inches fastener length, flat countersunk undercut head style, 0.225 inches head diameter, head height: 0.055 inches .
Manufacturer part number 6195755-1 for national stock number 5305010977193.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-097-7193.
-
MPN or Model
6195755-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.130 inches -
Fastener Length
0.310 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.225 inches -
Head Height
0.055 inches -
First Diameter From Head
Between 0.074 inches and 0.076 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.125 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Countersink Angle
100.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-021-5432 MPN 6083724Film Fixed Resistor
- 5930-01-057-8587 MPN 6935397-1Pressure Switch
- 5985-01-177-9140 MPN 6135499-1Radio Frequency Transmission Line Section
- 5935-01-352-6773 MPN 87-M39-005G2Connector Adapter
- 5985-01-363-6621 MPN 6135126-9Fixed Attenuator
- 1680-01-563-9865 MPN 253A310-2Amcm Console Assemb
- 5905-01-100-2440 MPN 6662384-1Resistor Assembly
- 5935-01-440-9093 MPN 185A498Electrical Plug Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-097-7193 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6195755-1 | Lockheed Martin Corporation |