NSN 5305-01-097-7917
High Torque Screw
Between 0.797 inches and 0.827 inches fastener length, oval countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT4072-3-8-5 for national stock number 5305010977917.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-097-7917.
-
MPN or Model
HT4072-3-8-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.797 inches and 0.827 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Stainless steel -
Material Specification
23-112 fscm 73197 mfr ref single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488, type 2, class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-204-5457 MPN BB302-6-8Machine Screw
- 5305-00-482-2957 MPN NAS1189C4P10LSocket Head Cap Screw
- 5305-00-519-7829 MPN HT4028LD4-10Close Tolerance Screw
- 5305-00-701-7998 MPN NAS1133-13Close Tolerance Screw
- 5305-00-815-0721 MPN NAS1123-2HClose Tolerance Screw
- 5305-00-815-3984 MPN HT3N-5Close Tolerance Screw
- 5305-00-815-4782 MPN NAS1204-19Close Tolerance Screw
- 5305-00-916-4871 MPN HR101H4-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-097-7917 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4072-3-8-5 | Hi-shear Corporation |
3M938-3-8-5 | Boeing Company, The |