NSN 5305-01-097-8213
High Torque Screw
Between 1.478 inches and 1.508 inches fastener length, between 0.6235 inches and 0.6245 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.625 inches.
Manufacturer part number HR101H10-10 for national stock number 5305010978213.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-097-8213.
-
MPN or Model
HR101H10-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.843 inches and 0.893 inches -
Fastener Length
Between 1.478 inches and 1.508 inches -
Grip Diameter
Between 0.6235 inches and 0.6245 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.625 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-5211 MPN AIC811-06-8Socket Head Cap Screw
- 5305-00-515-7058 MPN AIC551C-3-338Machine Screw
- 5305-00-915-4766 MPN A1C792-4-11Machine Screw
- 5305-01-138-7235 MPN ST3M454-7L25Close Tolerance Screw
- 5305-01-339-1417 MPN BACB30NT2K4Close Tolerance Screw
- 5305-01-357-6327 MPN AIC4414-04-11Machine Screw
- 5305-01-381-2351 MPN AIC818-08-103CSocket Head Cap Screw
- 5305-01-519-1525 MPN TORX1154V8Close Toleran Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-097-8213 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR101H10-10 | Hi-shear Corporation |
AIC1023H10-10 | Sps Technologies, Llc |
64040H10-10 | Sps Technologies, Llc |
VT1039H10-10 | Alcoa Global Fasteners, Inc. |
CS318642H10-10 | Textron Fastening Systems |
C387H10-10 | Lockheed Martin Corporation |
64040H10-10 | Sps Technologies, Llc |