NSN 5305-01-098-3781
Bolt Stove
Between 1.031 inches and 1.062 inches fastener length, flat countersunk head style, 0.322 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1102E3-17 for national stock number 5305010983781.
Datasheet
-
Product description
Machine Screw NSN 5305-01-098-3781.
-
MPN or Model
NAS1102E3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.889 inches and 0.982 inches -
Fastener Length
Between 1.031 inches and 1.062 inches -
Head Style
Flat countersunk -
Head Diameter
0.322 inches -
Internal Drive Style
Torque set -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Iron alloy 660 -
Screw Material Specification
Ams 5737 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1102 professional/industrial association standard
More from these suppliers
- 5940-01-413-3006 MPN NAS1063B112-128Terminal Board Marker Strip
- 5940-01-606-8690 MPN M81714/3-DA1Sectional Terminal Junction Block
- 5305-00-052-6916 MPN MS24629-49Tapping Screw
- 5305-00-052-7495 MPN MS16995-87Socket Head Cap Screw
- 5305-00-240-7149 MPN NAS1635-02-4Machine Screw
- 5305-00-269-3207 MPN MS90725-56Hexagon Head Cap Screw
- 5305-00-292-4547 MPN AN565A4H6Setscrew
- 5305-00-339-8961 MPN NAS1165-8Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-098-3781 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1102E3-17 | National Aerospace Standards |