NSN 5305-01-102-0314
High Torque Screw
Between 1.134 inches and 1.181 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number SFT22-6-A12 for national stock number 5305011020314.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-102-0314.
-
MPN or Model
SFT22-6-A12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.134 inches and 1.181 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response or ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-006-8241 MPN 16991P3F6Socket Head Cap Screw
- 5305-00-079-2587 MPN 73573-4-27CSocket Head Cap Screw
- 5305-00-450-7446 MPN SFT930-5-15Close Tolerance Screw
- 5305-00-842-0320 MPN NAS1190-3P12LSocket Head Cap Screw
- 5305-00-843-5676 MPN 5-1618NC2X1Socket Head Cap Screw
- 5305-00-889-2883 MPN NAS1143C6Machine Screw
- 5305-01-108-2523 MPN 110179-4-11Close Tolerance Screw
- 5305-01-346-3725 MPN 12705-5C-17BShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-102-0314 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFT22-6-A12 | Sps Technologies, Llc |
SFT22-6-A12 | Sps Technologies, Llc |