NSN 5305-01-103-1766
High Torque Screw
Between 0.788 inches and 0.808 inches fastener length, fillister countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, head height: 0.015 inches .
Manufacturer part number HT4072-4-6-7 for national stock number 5305011031766.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-103-1766.
-
MPN or Model
HT4072-4-6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.418 inches and 0.458 inches -
Fastener Length
Between 0.788 inches and 0.808 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.350 inches and 0.370 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
23112, ty d, fscm 76301 mfr ref single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9438 MPN HT4025L5D20Close Tolerance Screw
- 5305-00-302-9687 MPN HT409A4-25Shoulder Screw
- 5305-00-440-9973 MPN C082-3-11Close Tolerance Screw
- 5305-00-490-6523 MPN VT1051-4-7Close Tolerance Screw
- 5305-00-503-5684 MPN LS15267V3-40Machine Screw
- 5305-00-971-7531 MPN C082-6-31Machine Screw
- 5305-01-046-5461 MPN HT4009-4-4Shoulder Screw
- 5305-01-142-6291 MPN HT4008-6-13Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-103-1766 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4072-4-6-7 | Sps Technologies, Llc |
HT4072-4-6-7 | Hi-shear Corporation |
HT4072-4-6-7 | Sps Technologies, Llc |
HT4072-4-6-7 | Arconic Global Fasteners & Rings, |
HT4072-4-6-7 | Huck International, Inc. |
3M938-4-6-7 | Fastener Innovation Technology, Inc. |
3M938-4-6-7 | West Coast Aerospace Inc |
HT4072-4-6-7 | Lisi Aerospace Canada Corp |
HT4072-4-6-7 | Sps Technologies Ltd Tj Brooks |
3M938-4-6-7 | Boeing Company, The |
HT4072-4-6-7 | Sps Technologies Inc |
HT4072-4-6-7 | Huck Intl Inc |
HT4072-4-6-7 | Alcoa Global Fasteners, Inc. |