NSN 5305-01-103-8812
High Torque Screw
Between 0.641 inches and 0.671 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HT4057-3-4A for national stock number 5305011038812.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-103-8812.
-
MPN or Model
HT4057-3-4A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.641 inches and 0.671 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-406-3058 MPN 3M707-3-3-4Close Tolerance Screw
- 1560-01-575-2570 MPN 3M943E4-5-6Headle Shoulder Pin
- 5305-00-505-2935 MPN LS15264V3-5Machine Screw
- 5305-01-376-0746 MPN NAS1218-5-7PClose Tolerance Screw
- 5306-00-031-0921 MPN VAL22034-8F91Shear Bolt
- 5306-00-126-5167 MPN BACB30LM10DU28Shear Bolt
- 5306-00-541-9490 MPN VAL23029-6D19Close Tolerance Bolt
- 5306-00-759-4739 MPN 756105-109Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-103-8812 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4057-3-4A | Sps Technologies, Llc |
ST3M733-3L4 | Fastener Innovation Technology, Inc. |
WC4057-3-4 | West Coast Aerospace Inc |
HT4057-3-4A | Hi-shear Corporation |
HT4057-3-4A | Sps Technologies, Llc |
HT4057-3-4A | Lisi Aerospace Canada Corp |
ST3M733-3L4 | Boeing Company, The |
HT4057-3-4A | Alcoa Global Fasteners, Inc. |
HT4057-3-4A | Sps Technologies, Llc |
ST3M733-3L4 | Valley-todeco, Inc. |
HT4057-3-4A | Arconic Global Fasteners & Rings, |
ST3M733-3L4 | Heartland Precision Fasteners, Inc. |
HT4057-3-4A | Huck International, Inc. |
ST3M733-3L4 | Houston Precision Fasteners I, Lp |
11935-3L4 | Reid Products Inc. |
HT4057-3-4A | Sps Technologies Ltd Tj Brooks |
HT4057-3-4A | Sps Technologies Inc |
HT4057-3-4A | Fastener Innovation Technology, Inc. |
HT4057-3-4A | Bowe Bell And Howell Co |
HT4057-3-4A | Sps Technologies, Llc |
ST3M733-3L4 | Twist Tite Mfg, Inc |