NSN 5305-01-109-1349
High Torque Screw
Between 1.450 inches and 1.480 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1580A4T17 for national stock number 5305011091349.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-109-1349.
-
MPN or Model
NAS1580A4T17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.450 inches and 1.480 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-052-5105 MPN NAS1389-4Conductor Splice
- 5940-01-408-4280 MPN NAS1063A2-TB107CETerminal Board Marker Strip
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5940-01-381-7092 MPN NAS1063B226-235Terminal Board Marker Strip
- 5305-00-008-9112 MPN NAS1190C02T3LSocket Head Cap Screw
- 5305-00-019-9914 MPN NAS334CP40Close Tolerance Screw
- 5305-00-052-5084 MPN NAS338CPA17Close Tolerance Screw
- 5305-00-052-6682 MPN MS35198-32Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-109-1349 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4T17 | National Aerospace Standards |